Sub-03 Subaudible Tone Decoder
Sub-03 shown without optional rack mount
Need to decode subaudible tones for you station?
No problem with the CircuitWerkes Sub-03.
You can use the Sub-03 to automate your network
feeds or take the guess work out of when
to cut away from networks. The decoder listens
to your network audio and gives you dry contact
closures from any service that sends subaudible
tones including satellites, RPUs, ISDN loops
and more! The Sub-03's relay contacts interface
easily with your automation system. The Sub-03
accepts a wide range of input audio signals
and its fully adjustable, active, balanced
output can be used to feed your equipment.
Internal filters greatly reduce the presence
of tones in the output. The Sub-03 is a reliable
and inexpensive problem solver. For those
services supplying 50 Hz & 75 Hz tones,
the Sub-03 may be ordered configured from
the factory set for those frequencies at
no additional charge. The Sub-03 is packaged
in an all metal enclosure that can be desk
mounted, hung on a wall, or with the rack
mounted using the optional mounting plate.
As with all CircuitWerkes broadcast products,
the Sub-03 is covered by our two year warranty.
The CircuitWerkes SEN-6 is the compliment to the Sub-03 for your
subaudible tone encoding needs.
With over a dozen years of decoding experience,
the Sub-03 is trusted by more major networks
and stations worldwide than any other!
Accept no false claims; only CircuitWerkes
decoders are proven ultra-reliable, even
on noisy channels with suppressed tone injection.
| The CircuitWerkes Sub-03 tone decoder is
a great way to get
the relay closures
you need to automate
your network feeds.
||Microprocessor controlled for greater reliability
and noise immunity.
||Dry relay closure outputs.
25, 35 & 25/35 combination tones. May also be ordered
configured for 50/75Hz operation at no extra cost.
tones do not activate 25 or 35 outputs.
a balanced output minus the tones.
either balanced or unbalanced audio input.
for all tones, input set, output clipping & power.
input & output gain.
input lets you (or your automation system) prevent
standard 1/4" TRS (headphone style) jacks for input
& output audio.
output & power connections are on both screw terminals
and Db-9 connectors for easy hookup.
Further info on
on the planet
FREE Go FTP