Location |
CircuitWerkes
2805 NW 6th Street
Gainesville, Florida 32609
Phone: 352.335.6555
Fax: 352.380.0230
|
Custom & Private Label Projects |
CircuitWerkes designs and fabricates both custom
and private label electronics as well as modified versions of
our regular designs. Click here to learn more.
|
|
|
|
Cool New Products
- The SiCon-8 is a Dialup Remote Control like
no other. Allowing you
to record your own
messages, the Sicon-8
can speak any language
in the world. Eight metering,
eight control
and eight status channels
allow you total
control of your transmitter
site. The SiCon-8
comes with a free Windows-based
GUI for easy
visual monitoring of
every channel. X-10
capability also allows
remote control through
existing internal power
wiring of lights,
motion sensors, and much
more! Click here for information on the SiCon-8.
- Introducing the MicTel, CircuitWerkes' update
of the Gentner brand
MicroTel. With all the
features you are use
to, plus many new ones,
the MicTel becomes the
new "must-have"
box for remote broadcasts.
The battery life
on the MicTel lasts up
to an incredible 36+
hours! Click here for information (PDF) on the MicTel.
- The pREX is a Smart Relay Converter / Multiplier.
pREX accepts a wide variety
of input signals
and converts them to
contact closure outputs.
Microprocessor control
lets you chose special
modes, like latching,
interlocked, timed,
closure on input release,
etc. With RS-232
input, you control the
functions on the fly.
All outputs appear on
a 50-pin SCSI (RJ-21)
connector that interfaces
with standard Telco
66 punchblocks for easy
wiring. Click here for information (PDF) on the pREX.
- The REX is an inexpensive relay multiplier
with 6 isolated inputs and 24 contact closure
outputs. Each inputs an be set for active
high, active low, or direct drive of the
relays. Click here for information (PDF) on the REX
- The GENr8 is a powerful, yet inexpensive
DTMF encoder. It can produce either single
DTMF tones or can record and play DTMF sequences
up to 20 digits long. RS-232 lets you control
or program the GENr8 from any PC. Click here for information (PDF) on the GENr8
- The DT-232 is a DTMF to computer interface
that can decode DTMF
tones and send them
to your PC or it can
take input from your
PC and generate DTMF
tones. Answers telephone
calls and sends/receive
DTMF tones. Four
DTMF controlled relays
can operate external
devices. Click here for information (PDF) on the DT-232
- Introducing the TelTap, an inexpensive manual
telephone coupler and
passive telephone line
listener. The TelTap
is a completely passive
device that can be used
as either a manual
telephone coupler or
can be used as a phone
"tap". The
TelTap includes a ring
detector LED and two
RJ-11 connectors. The
RJ-11s are normally in
parallel so that you
can connect a telephone
through the TelTap.
The telephone interconnect
RJ-11 can be set
to auto-disconnect when
the TelTap is used
as a manual coupler.
Audio is transformer
coupled to a 1/4"
TRS (Headphone style)
jack that can be used
to send or receive
half-duplex audio from
any standard phone
line or analog port.
A mute switch is included
to shut off the audio
as desired. Switches
are recessed for ruggedness
making the TelTap
an excellent accessory
for broadcast remote
kits. No power is required
to use the TelTap.
List price is $89.00.
Find out more about the TelTap.
- TELCO-6, a multi-line telephone ringer interface.
The Telco-6 accepts up to six telephone line
inputs. It detects incoming rings for
all six lines and provides individual DPDT
relay contact outputs for each line.
The Telco-6 is just $259 and is available
now. Get more info on the Telco-6 here.
- The CircuitWerkes SUB-03 was completely redesigned
in 2003 to be even easier to set up and more
reliable than ever due to new microprocessor
technology. It can be used to automate your
network feeds or take the guesswork out of
when to cut away from networks. The decoder
listens to your audio source and gives you
dry contact closures from any service that
sends subaudible tones, including satellite
receivers, RPUs and POTS frequency extenders.
The decoder's relay contacts interface easily
with your automation system.Click here to download information for the
SUB-03.
|
|
|