WebGain4 Front Panel
The CircuitWerkes WebGain4 is a four channel audio gain controller that
can be operated from the front panel or it can be operated remotely
through its integrated Web server. It has four, single-channel, inputs
and outputs and two mixed outputs. All inputs and outputs are balanced.
The integrated Web server lets users adjust the gain of each channel
while viewing the output audio level, in real time, on its own meter in
the browser of their choice. Each meter displays the measured audio
level at the audio output port. The measurement value for each of the
channels is set by a dedicated potentiometer adjustable from the front
panel.
A front panel LCD, with user interface controls, allows for local
control of the WebGain4, too. On the back panel are four individual
channel outputs AND two mixer outputs that allow the WebGain4 to be
used as either a 4-channel mono mixer or as a two-channel stereo mixer.
All audio inputs and outputs appear on depluggable, three position,
screw terminals. The network connection is via standard RJ-45.
Audio levels for each channel are independently adjustable over 256
steps from zero to a maximum audio output level of +17dBm. Channels can
be linked together so that changes to one will automatically change all
others in a group. The grouped function can be used to preserve stereo
balance. Each channel can be stepped through its range of control by
using up/down buttons, or any value. From 0 (zero) to 256, can be
directly entered.
The WebGain4’s front panel can be locked to prevent unauthorized
changes.
|
|
|
Features |
> |
Connects
to
any
LAN or the Internet
|
> |
Four
channels
of
independant audio.
|
> |
Two mix
outputs for stereo/dual mono mixes.
|
> |
Control the
audio from the front
panel or via the Web server
|
> |
Real-time audio monitoring
meters
|
> |
User-settable,
password
prevents pirating.
|
> |
Each channel can
be individually controlled or channels can be grouped together to form
pairs or all commonly controlled.
|
> |
Channel labels
are user defined.
|
> |
Active balanced inputs
& outputs on depluggable screw terminals
|
> |
Front
panel LCD & controls for setting IP address, general configuration
and controlling audio.
|
> |
Both
static and dynamic IP addresses are supported. |
> |
Front panel multi-adjust mode lets you adjust all channels
simultaneoulsy.
|
> |
Retains its settings after a power failure. |
> |
Web applet tells you if the network link is broken.
|
> |
Web applet auto-reconnects if the network link is
broken
|
> |
Rugged, metal case can be table, wall or, optionally,
rack mounted. |
|
|