|
|
TAC-5 Telephone Remote
Broadcast Coupler with DTMF Control
The TAC-5 combines a telephone autocoupler with a password protected,
DTMF, remote control for handling remote broadcasts or general dial-up
control from anywhere. It automatically answers the phone on a user set
number of rings and waits for you to enter your password (from none to
8 digits). After entering your password, you have complete control of
the TAC-5's relays. Audio is passed to and from the telephone line,
making the TAC-5 ideal for unattended remote broadcasting. While
the telephone interface lets you get your audio on the air, you can use
the TAC-5's relays to control your automation system or even put
yourself direclty on the air, bypassing everything else in your air
chain. The direct to air mode is not only useful for remotes, it
is also great for emergency broadcasts when weather strikes, etc.
Relays can be
individually programmed for momentary,
latching or interlocked operation. Each relay can be programmed to
decode any of the 16 DTMF tones. Any relay can be tied to any other for
modes such as latching and interlocked. Relays can return a beep
acknowledge tone that tells you when you've activated an output. The
TAC-5 includes a two-tone sequence mode that prevents accidental
contact closures when you're using it for remote broadcasts.
The TAC-5 has
a logic level input that can cause the TAC-5
to call you or your pager or phone number (up to 24 digits long).
|
|
|
The CircuitWerkes
TAC-5 dial-up remote control is perfect
for studio & automation control. With features not found anywhere
else, you might be amazed at the TAC-5's list price of only $319.00.
|
Features |
> |
5 N.O Dry relay contacts out (1 is
DPDT for easily switching balanced audio, etc.).
|
> |
Auto-answers on user selectable
ring number and auto-drops at call's end. |
> |
Each relay can be independently
set to function as a momentary closure, latching closure with distinct
on/off codes, or interlocked latching with other relays. |
> |
Individual relays can be
programmed to close at beginning or end** of tones. |
> |
Up to 8-digit user-settable
password prevents pirating. |
> |
A second password can be assigned
to allow listening without control functions. |
> |
Any relay can be assigned to any
tone(s). |
> |
Open collector outputs when the
TAC-5 goes on-line or rings. |
> |
Momentary open collector output
when it hangs up. |
> |
Two-tone mode
eliminates falsing. |
> |
A Status input can dial your
number for alarms. |
> |
A simple, built-in audio hybrid
lets you control equipment while monitoring a local audio source. |
> |
Each relay is programmable to beep
when activated. |
> |
Provides active, balanced, phone
line audio input and output. |
> |
All outputs appear on easy to use
screw terminals. |
> |
Program it with any DTMF phone or
encoder. |
> |
Retains its settings after a power
failure. |
> |
Rugged, metal case can be table,
wall or, optionally, rack mounted. |
> |
Each TAC-5 relay
can be programmed to take specific actions at pickup, or unlock or at
the end of a call. |
> |
Programmable DTMF
inactivity timer disconnects calls if no commands are sent for the set
amount of time. |
|
|
The TAC-5 features an
audio hybrid that allows you to control the unit while monitoring an
external audio source. That makes the TAC-5 a great choice for EAS
monitoring, remote controlled audio switcher, etc. Of course, an
active, balanced telephone audio feed, with send and receive gain
controls, is brought out so that you can put the telephone audio on the
air or into a recorder. A second, user set password is available that
allows the TAC-5 to be used as a listening device only. When the
secondary password is entered, the TAC-5 passes send audio to the
caller and will stay on-line, but the caller has no control over the
unit's relays. Additional ground sink outputs occur when the TAC-5
seizes the phone line and when it hangs up. Programming is easily done
from any DTMF telephone. The TAC-5 is compatible with the CP-1
Call Progress Decoder option. For a complete list of TAC-5 features and
controls, please download the
current TAC-5 manual from our main site. Other manuals are also
available there as well.
** End of tone closures operate in momentary mode only.
|
|
|