Welcome to CircuitWerkes

CircuitWerkes SiteSentry2 - Web Based, 2 Channel, Remote Monitor & Controller

A Full-Featured Remote Control for only $329!

Remote site monitor with 2 DC metering inputs, 2 status inputs & 6 relay outputs

The CircuitWerkes SiteSentry2 ushers in a new era of remote site monitoring. An internal Web server lets you monitor your site from any Web browser, anywhere in the world. Automatically detects both meter low and meter overload conditions on one, or both channels. An internal temperature sensor can respond to high or low temperature conditions. The external audio monitor meters two channels of audio and can respond if either silence or overload are detected.

Multi-purpose control functions
Need to remotely control something?  The SiteSentry2 gives you Web control of six relays (two are DPDT) that can be latching or momentary.  Two status inputs give a visual indication, via the Webserver, whenever grounded & can also trigger automated relay actions.   Use the SiteSentry2 anywhere that you need an inexpensive, network adressable, controller with status capabilities. Three levels of user control are available ranging from reader up to administrator.    

Automatic (user programmable) functions
When meter-low, overload, or external status change, is detected, the SiteSentry2 can perform user-programmed, automated, sequences of actions and can also respond to user control via the network or via external contact closure inputs.   Actions can be programmed to run once or to repeat while the condition exists.  Alternate actions (or cancellation of previous actions) can be set to run when the audio returns to normal.

Up to two SiteSentry2s can be optionally rack mounted in a single sized rack shelf. Administrators can perform all setup through the Web server.

The SiteSentry2 includes free multi-site monitoring monitoring software.  User settings & labels can be saved to the host computer and uploaded to the original SiteSentry2, or to others for mass programming.

List Price is just $329/ea

> Internal Web Server lets you monitor your site from anywhere in the world.
> Channel monitoring via meters and digital readout of values.
> Onboard dual input audio monitor can detect silence or overload on stereo or mono systems.
> Web interface knows when it has lost communications with the site and alerts you and tries to reconnect automatically.
> Has an on-board temeperature sensor
> 18 User-definable alarm conditions can trigger up to 3 actions per alarm.
> Two external status inputs can activate user-defined actions. Inputs are optocoupled and triggered by grounding or by supplying a voltage (user configured).
> Six independant relay outputs (4 SPST & 2 DPDT), controlled by action sequences or by user command
> Relays can be momentary or latching.
> DHCP or Static IP capable.
> Multi-Site monitoring software
included (coming soon)!
The SiteSentry2 Main Screen

Above: The main operating screen for the SiteSentry2 with low audio level detected (red meter backgrounds).

Below: The Configuration Screen for the SiteSentry2
SiteSentry2 Config Screen

Below: The SiteSentry2's back panel layout


Copyright © 2004-2010 CircuitWerkes Inc. All Rights Reserved.

What the world says about var and math
This file transported by Go FTP FREE Software