Shown without optional
rack mount
Bridge the DS-8 across
your audio source and get eight individually
programmable relay
outputs. The DS-8 is excellent
for controlling VTRs and
local spot insertions. Individually
programmable closures are the key.
Each relay can be set
for one, two, three, or four digit
code(s). Each relay can easily
(and independently) be programmed
to operate in one of three
modes; momentary, latching,
or interlocked latching. If a relay
is set for momentary
operation, it provides a momentary
closure upon hearing its
programmed code of one to four
DTMF digits. In Latching
mode, the relay turns on with one
code and off with another. Interlocked
latching mode is similar
to latching mode except that
an energized relay (that's been set
up as interlocked latching)
will be turned off when
another interlocked latching relay is
energized. Of course the OFF
code works too. You can set
up the relays in any mixture
of modes and code lengths.
You can even reprogram your
relays remotely if you know the programming
code. The DS-8
mounts to the wall or can be rack-mounted
in a 1 RU space
with our inexpensive rack mount
kit. Optional custom preprogramming
of the default relay codes
is available. The default relay
codes take effect when a user initiates
a hardware reset.
|
|
|
Features |
> |
Each of the eight relays are independently
programmable for codes and mode. |
> |
Powered RJ-11 jack allows easy programming
with any DTMF phone. |
> |
The DS-8 can be remotely programmed over the
audio cue channel, if desired, allowing you
to change functions and codes remotely. |
> |
High impedance, unbalanced, bridging input
allows the DS-8 to listen to almost any audio
source. |
> |
Wide input signal range. |
> |
High quality metal enclosure can be wall or
table mounted. Optional, low cost, rack mount
(1RU) available. |
> |
All connections on screw terminals |
|
|